3G AQUA 136 MSDS

 

Material Safety Data Sheet

3G AQUA-136

1. PRODUCT AND COMPANY IDENTIFICATION

3GAQUA-136 (SCALE AND CORROSION INHIBITOR FOR COOLING WATER)Revision date:01/04/2009

Supplier: 3gaqua chemicals pvt. Ltd.

Plot no. 338,scheme no. 94,

f-201,gulmohar inclave,

ring road near mayor hospital,

indore, m.p. india.

For non-emergency information: Telephone n.umber:91-9669945500

For emergency: Telephone number:

Spill Emergency91-9300904222

Health Emergency 91-9300443555

Chemtrec91-7509942806

2. COMPOSITION/INFORMATION ON INGREDIENTS

Combination of organophosphonates, anionic polyelectrolites, corrosion inhibitors, polyphosphates stabilized with chelating agents and polymeric dispersing agents.

3. HAZARDS IDENTIFICATION

Emergency Overview

Appearance

FormClear liquid

ColorPale yellow to yellow

OdorAlmost odorless

Hazard SummaryEmergency overview: water treatment chemical
Non-corrosive compound

May be harmful if swallowed
Non Toxic

Potential Health Effects

Primary Routes of Entry: Inhalation

Eye contact

Skin contact

Eyes: Direct contact with material can cause the following:

Irritation

Skin: Prolonged or repeated skin contact can cause the following:

Irritation

Inhalation: Non-hazardous

Environmental effects

On the basis of available information, this material is not expected to produce any significant adverse environmental effects when recommended use instructions are followed.

4. FIRST AID MEASURES

General: Take off immediately all contaminated clothing.

Grossly contaminated clothing: Wash before re-use.

Inhalation: Move to fresh air.

Skin contact:Wash with water and soap as a precaution.If skin irritation persists, call a physician.

Eye contact: Rinse with plenty of water.If eye irritation persists, consult a specialist.

Ingestion: Drink 1 or 2 glasses of water.Consult a physician immediately.Never give anything by mouth to an unconscious person.Do not induce vomiting.

5. FIRE-FIGHTING MEASURES

Flash pointNoncombustible

Lower explosion limitNot applicable

Upper explosion limitNot applicable

Thermal decomposition>230.00

Suitable extinguishing media:

Water spray, foam, dry chemical, or carbon dioxide.

Use extinguishing media appropriate for surrounding fire.

Specific hazards during fire fighting:

When heated to decomposition, it may emit toxic fumes of Na2O

Special protective equipment for fire-fighters:

Wear self-contained breathing apparatus and protective suit.

6. ACCIDENTAL RELEASE MEASURES

Personal precautions

Use personal protective equipment and clothing.

Environmental precautions

Non-corrosive, non-combustible, non-hazardous material

Methods for cleaning up

Contain spills with inert materials (e.g., sand, earth).

Transfer liquids and solid spilled material to separate suitable containers for recovery or disposal.

7. HANDLING AND STORAGE

Handling

Handle with care.  Wash thoroughly after handling. Avoid contact with clothing.

Storage water treatment chemical

Store in a tightly closed container. Store in a cool, dry, well-ventilated area, away from incompatible substances like explosives.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Exposure limit(s)

Exposure limits are listed below, if they exist.

Eye protection: safety glasses with side-shields. Eye protection worn must be compatible with respiratory protection system employed.

Hand protection: The glove(s) listed below may provide protection against permeation. Gloves of other chemically resistant materials may not provide adequate protection):Neoprene gloves.

Respiratory protection: A respiratory protection program meeting OSHA 1910.134 and ANSI Z88.2 requirements or equivalent must be followed whenever workplace conditions warrant a respirator's use.None required under normal operating conditions.Where vapors and/or mists may occur, wear a properly fitted NIOSH approved (or equivalent) half-mask, air-purifying respirator.Air-purifying respirators should be equipped with NIOSH approved (or equivalent) organic vapor cartridges and N95 filters. If oil mist is present, use R95 or P95 filters.

Protective measures: Facilities storing or utilizing this material should be equippedwith an eyewash facility.

Engineering measures: Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure limits.

9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance

FormLiquid

ColorWater white to pale yellow

OdorAlmost odorless

pH >10.0

Boiling point/range100°C (212°F) Water

Melting point/range0°C (32°F) Water

Flash pointNoncombustible

Lower explosion limitnot applicable

Upper explosion limitnot applicable

Vapor pressure5.0 mmHgat20°C (68.00 °F) Water

Relative vapor density<1.0 water

Water solubilityCompletely soluble

Relative density1.20

Viscosity, dynamic100.000 - 500.000 cps @ 25°c

Evaporation rate<1.00 Water

 

NOTE:The physical data presented above are typical values and should not be construed as a specification.

10. STABILITY AND REACTIVITY

Hazardous reactionsNone known. Stable However, avoid temperatures above 230C/446F, the nset of polymer decomposition

Thermal decomposition is dependent on time and temperature

Materials to avoidThere are no known materials which are incompatible with this product

Hazardous decomposition productsNot hazardous, Hazardous polymerization will notoccur

11. TOXICOLOGICAL INFORMATION

Non toxic.
IARC carcinogenic category - none
Epidemiology:   No data available.

Acute oral toxicityNot established

Acute dermal toxicityNot established

Skin irritationrabbit: No skin irritation

Eye irritationrabbit: slight irritation

12. ECOLOGICAL INFORMATION

Do not allow the compound to reach ground water sources.

13. DISPOSAL CONSIDERATIONS

Environmental precautions: CAUTION: Keep spills and cleaning runoff out of municipal sewers and open bodies of water.

Disposal Waste Classification:Dilute with water. Dispose of in a manner consistent withlocal regulations.

14. TRANSPORT INFORMATION

US DOT – Domestic   Not-regulated
IMO – International

DOT-Domestic, Not regulated

IMO/IMDG-Not regulated (Not dangerous for transport)

15. REGULATORY INFORMATION

Workplace ClassificationThis product is considered non-hazardous under the OSHA Hazard Communication Standard (29CFR1910.1200).

This product is not a 'controlled product' under the Canadian Workplace Hazardous Materials Information System (WHMIS).

SARA Title III: Section 311/312 Categorizations (40CFR370):

This product is not a hazardous chemical under 29CFR 1910.1200, and therefore is not covered by Title III of SARA.

SARA Title III: Section 313 Information (40CFR372):

This product does not contain a chemical which is listed in Section 313 at or above deminimis concentrations.

CERCLAInformation(40CFR302.4):

Releases of this material to air, land, or water are not reportable to the NationalResponseCenter under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) or to state and local emergency planning committees under the Superfund Amendments and Reauthorization Act (SARA) Title III Section 304.

US Toxic Substances Control Act (TSCA):

All components of this product are in compliance with the inventory listing requirements of the U.S. Toxic Substances Control Act (TSCA) Chemical Substance Inventory.

Pennsylvania

Any material listed as "Not Hazardous" in the CAS REG NO. column of SECTION 2, Composition/Information On Ingredients, of this MSDS is a trade secret under the provisions of the Pennsylvania Worker and Community Right-to-Know Act.

16. OTHER INFORMATION

Hazard Rating

HealthFireReactivity

HMIS100 000

Legend

ACGIHAmerican Conference of Governmental Industrial Hygienists

BAcButyl acetate

OSHAOccupational Safety and Health Administration

PELPermissible Exposure Limit

STELShort Term Exposure Limit

TLVThreshold Limit Value

TWATime Weighted Average (TWA):

|Bar denotes a revision from prior MSDS.

Notice:

This material safety data sheet must be made available to all persons who, by the nature of their employment, may handle or come into contact with this material.

Disclaimer:

The percentage weight (% w/w) of ingredients is not to be taken as a specification guaranteed by 3gaqua chemicals pvt. Ltd., but only as an approximate guide to the content of hazardous ingredients in the material. The information contained herein does not constitute a guarantee by 3gaqua chemicals pvt. Ltd concerning the properties of the material.

The information contained in this material safety data sheet is offered in good faith and is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as guidance for safe handling, use, processing, storage, transportation, disposal and release and is offered without warranty, representation, inducement or licence and 3gaqua chemicals pvt. Ltd alities assumes no legal responsibility for reliance upon same. 3gaqua chemicals pvt. Ltd disclaims any liability for loss, injury or damage incurred in connection with the use of the material or its associated material safety data sheet.

This information is not be construed as a representation that the material is suitable for any particular purpose or use except those conditions and warranties implied by either commonwealth or state statutes. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text. Customers are encouraged to make their own enquiries as to the material's characteristics and, where appropriate, to conduct their own tests in the specific context of the material's intended use.

Print Date: 01/04/2009

Copyright © 2013 3gaqua.in All Rights Reserved 3G Aqua Chemicals Pvt Ltd. Designed by: Pixmiracle Multimedia